User Tools

Site Tools


frequently_asked_questions

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
frequently_asked_questions [2016/11/16 17:57]
admin
frequently_asked_questions [2019/08/07 09:01]
admin
Line 2: Line 2:
  
 **Q: When I record, the sound from the existing tracks bleed into the new track. How can I solve that?** **Q: When I record, the sound from the existing tracks bleed into the new track. How can I solve that?**
-A: The internal microphone will pick up any sound, including the sound coming from your speakers, this is pure physics. To solve this, you need to separate those signals. This can be done by using a headset, an iRig device (like the iRig MIC Cast where you can insert headphones) ​or a USB audio interface. If you do not have such equipment, you can reduce this behavior by enabling ​the 'Session latency correction' and selecting ​'OpenSLES' ​as audio system in the app's preferences so that recordings are in sync with the existing tracks.+A: The internal microphone will pick up any sound, including the sound coming from your speakers, this is pure physics. To solve this, you need to separate those signals. This can be done by using headphones, ​a headset or a USB audio interface. If you do not have such equipment, you can reduce this behavior by setting ​the 'Audio System'​ in the settings to '​Oboe/​AAudio' and then run 'Determine latency' ​from the 'More' menu. This should give a jitter of around 0 milliseconds.
  
 When you are using headphones and still got track bleed, then you are probably using a 3-pole connector. Android devices use a 4-pole socket (TRRS) and the output poles can touch the mic pole, causing bleed (see [[http://​www.nx7u.net/​android.html]] for example). You would need a splitter cable, but beware that some of these are wired incorrectly. When you are using headphones and still got track bleed, then you are probably using a 3-pole connector. Android devices use a 4-pole socket (TRRS) and the output poles can touch the mic pole, causing bleed (see [[http://​www.nx7u.net/​android.html]] for example). You would need a splitter cable, but beware that some of these are wired incorrectly.
frequently_asked_questions.txt ยท Last modified: 2019/08/07 09:01 by admin